Materials

1. #70-9001 Sand Etch Starter Kit
2. #70-9007 Inflate a Booth
3. #70-9101 Sand Etch Propellant
4. 31-0401 Beige Masking Vinyl
5. Red Vase

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Armour Etch Usage Instructions

Project Steps

• Cut out flourish design pieces from the vinyl. Lay pieces onto the prepared glass and smooth down completely.
• Inflate the boot and follow the sand etch kit instructions to etch the design onto the glass. Keeping the sand jar full will extend the life of the propellant. See the sand etch tutorial if necessary.