Outdoorsman Dad Outdoorsman Dad Perfect for the fish and game enthusiast in your life! A very versatile gift for Dad on Father's Day, Christmas or his Birthday! Replace the word Dad with Mom and make one for her too. We used a drinking glass for this design but you can use any etc
PTL Header Links (custom)
Follow Us
Location
Home / Projects / Family / Outdoorsman Dad

Outdoorsman Dad

Outdoorsman Dad

Outdoorsman Dad

Perfect for the fish and game enthusiast in your life! A very versatile gift for Dad on Father's Day, Christmas or his Birthday! Replace the word Dad with Mom and make one for her too. We used a drinking glass for this design but you can use any etchable glass piece you desire.



Materials:

#15-0200 Armour Etch Glass Etching Cream.

#21-1657 Over N Over stencil- WILD THINGS

#21-1683 Over N Over stencil- WATER BIRDS

#21-1605 Over N Over stencil- BUTTERFLIES

#21-1617 Over N Over stencil- WEDDING FONT

#08- 9606 Brushes.

#08- 9999 Gloves.

#08- 9415 Masking tape.

Soft paper towels.

Optional:

Tweezers, ruler, exacto knife and water soluble marker

DIRECTIONS:


1. Wash the item to be etched in hot, soapy dishwater and dry with a soft paper towel then wipe down design area with glass cleaner

2. You may want to mark the centerline of your item before you begin. With a ruler and a water-soluble marker (not a sharpie) draw the centerline on the back side of the item. This makes it easier to create your design in the location you want it on the project

3. Remove the deer stencil from the sheet and place near the top of the glass. Avoid touching the sticky side of the stencil as oils from your hands can interfere with adhesion. Using a tweezer to hold stencil while deciding on placement location can help with this.

4. Using a popsicle stick or other dull instrument, press the stencil down gently to prevent the cream from getting underneath during etching.

5. Cover all the glass around the stencils with masking tape, overlapping all edges. Check for exposed spaces by turning the project over and holding up to the light. Cover enough area so that none of the rinse water will touch any of the other glass while rinsing as even the small amount of etching cream in the water will permanently haze the glass.

6. Put on the rubber gloves. Load the brush with Armour Glass Etching cream. PAT the etch cream onto the stencils (do not brush it on). Apply a thick enough layer of cream to the exposed design area that you can no longer see through it. . (View the directions HERE)

7. Leave cream on for 5 minutes

8. Completely rinse off the etch cream under gently flowing temped water. Remove the stencils and masking tape and rinse again. Pat the stencils dry and return to the carrier sheet.

9. Wipe design area with glass cleaner. You may want to redraw centerline on the back of the project again. Apply the lettering or word stencils first, overlapping the edges where they meet. Avoid touching the sticky side of the stencil as oils from your hands can interfere with adhesion. Using a tweezer to hold stencil while deciding on placement location can help with this.

10. Repeat steps 4 through 8

11. Wipe design area with glass cleaner. You may want to redraw centerline on the back of the project again. Arrange all other design elements into their desired location. You can use parts of a stencil design by covering over the unwanted design features with masking tape or by trimming the stencil with scissors. If stencils overlap into each other's design, etch them individually, one at a time. To make the water rushes use the tall grass stencil from the Butterflies sheet and cover the flower with masking tape.

12. Repeat steps 4 through 8 until all desired design elements have been etched onto the glass

Materials

Directions

Article Posted: 06/17/2019 09:04:51 AM

Outdoorsman Dad
Phone: (800) 872-3458
SKIN WIDGIET - MINI LOGIN
Your Cart
Your Cart: Empty
Search
Email Signup
© 2020 Etchworld.com, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2020 Kryptronic, Inc. Exec Time: 0.079534 Seconds Memory Usage: 8.327927 Megabytes
Kryptronic