Materials

• #15-0200 Armour Etch Glass Etching Cream
• #21-1644 Over N Over Stencil-PUMPKIN FACES
• #21-1635 Over N Over Stencil-REVERSE LETTERS
• #30-2360 18.5 oz. Pilsner Glass

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. This design was etched in stages.The technique allows the use of a particular stencil image multiple times on the same project when you don't have enough to etch all simultaneously. Additionally, it enables stencil images to be placed in closer proximity than the stencil borders would otherwise permit.
2. After preparing the glass, begin at the bottom and working upward, place one empty pumpkin above the other. Position the K and E inside the pumpkins. Follow the etching cream instructions to etch them onto the glass.
3. Place the pumpkin above the other two with an E inside. Position the bats above and around the pumpkins. Use the etching cream , as before, to etch the pumpkin and bats onto the pilsner.