Ornament Assortment A&B Combo Etch Kit Ornament Assortment A&B Combo Etch Kit Couldn't decide between Ornament Kit A or B? We have you covered with this A & B Combo Assortment! This kit gives you double the design ability without doubling the price tag! Our Holiday Assortment Kits are a quick and crafty way to keep the Happy
PTL Header Links (custom)
Follow Us
Location
Home / Projects / Christmas / Ornament Assortment A&B Combo Etch Kit

Ornament Assortment A&B Combo Etch Kit

Ornament Assortment A&B Combo Etch Kit

Couldn't decide between Ornament Kit A or B? We have you covered with this A & B Combo Assortment! This kit gives you double the design ability without doubling the price tag! Our Holiday Assortment Kits are a quick and crafty way to keep the Happy in your Holiday Season! Make these your Go-To for Fantastic stocking stuffers, secret Santa / grab bag gifts, hostess presents, teacher & neighbor gifts or when you just need that special extra something. Don't forget the family! The holidays are all about being together, celebrating traditions and making beautiful memories. Making an ornament assortment kit together gives you all three! Recreate the designs pictured or make your own custom creation! The kit comes with 4 glass shapes but you can always order extras.

Materials:

#06-0152 ORNAMENT ASSORTMENT B ETCH KIT.

#08- 9999 Gloves.

#08- 9415 Masking tape.

Soft paper towels.

Optional:

Tweezers, ruler, exacto knife and water soluble marker.

#29-2511 BELL SHAPE.

#29-2518 CIRCLE SHAPE.

#29-2508 TREE SHAPE.

#29-2514 STOCKING SHAPE.



DIRECTIONS:


1. Wash the item to be etched in hot, soapy dishwater and dry with a soft paper towel then wipe down design area with glass cleaner.

2. You may want to mark the centerline of your item before you begin. With a ruler and a water soluble marker (not a sharpie) draw the centerline on the back side of the item. This makes it easier to create your design in the location you want it on the project.

3.Refer to the completed project images for kits A & B for ideas or to create one of the designs shown. Once you have decided on a design, begin placing the stencils on the glass. Avoid touching the sticky side of the stencil as oils from your hands can interfere with adhesion. Using a tweezer to hold stencil while deciding on placement location can help with this. You can use parts of a stencil design by covering over the unwanted design features with masking tape or by trimming the stencil with scissors. If stencils overlap into each other???ج??ɬ?Ǭ?Ǭ????ج????Ǭ???ج????Ǭ???Ǭ???Ǭ???Ǭ????ج????Ǭ???ج????Ǭ???ج????Ǭ???ج????Ǭ?s design, you can trim with a scissor or etch them individually, one at a time.

4. To make the stripe at the top of the stocking, or any other lines, use the border edge from the stencil carrier sheet. Cut at the corners and use lengths of the edge to make parallel lines on either side of the ones you drew on the glass. The space between the lines will determine the thickness of the line you make.

5. Using a popsicle stick or other dull instrument, press the stencils down gently but firmly to prevent the cream from getting underneath during etching.

6. Cover all the glass around the stencils with masking tape, overlapping all edges. Check for exposed spaces by turning the project over and holding up to the light. Cover enough area so that none of the rinse water will touch any of the other glass while rinsing as even the small amount of etching cream in the water will permanently haze the glass.

7. Put on the rubber gloves. Load the brush with Armour Glass Etching cream. PAT the etch cream onto the stencils (do not brush it on). Apply a thick enough layer of cream to the exposed design area that you can no longer see through it. (View the directions HERE)

8. Leave the cream on for 5 minutes

9. Completely rinse off the etch cream under gently flowing temped water. Remove the stencils and masking tape and rinse again. Pat the stencils dry and return to the carrier sheet.

10. Wipe design area with glass cleaner. Place any remaining design elements into their desired location. Remember, you can use parts of a stencil design by covering over the unwanted design features with masking tape or by trimming the stencil with scissors. If stencils protrude into each other???ج??ɬ?Ǭ?Ǭ????ج????Ǭ???ج????Ǭ???Ǭ???Ǭ???Ǭ????ج????Ǭ???ج????Ǭ???ج????Ǭ???ج????Ǭ?s design, etch them individually, one at a time.

11. Repeat steps 5 through 9 until all desired design elements have been etched onto the glass

Materials

Directions

Article Posted: 11/03/2019 04:48:20 PM

Ornament Assortment A&B Combo Etch Kit
Ornament Assortment A&B Combo Etch Kit
Phone: (800) 872-3458
SKIN WIDGIET - MINI LOGIN
Your Cart
Your Cart: Empty
Search
Email Signup
© 2020 Etchworld.com, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2020 Kryptronic, Inc. Exec Time: 0.091427 Seconds Memory Usage: 8.32988 Megabytes
Kryptronic