Materials

• 15-0200 Armour Etch Glass Etching Cream
• 21-1667 Over N Over Stencil-HALLOWEEN
• 21-1693 Over N Over Stencil-BONES ALPHA
• 8.5 x 8.5 Inch Glass Square
• 4 Clear Glass Pebbles
• Glass Glue

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. After preparing the glass, place it on an art mat with grid lines, if desired. Beginning with the letter C, position the letters for Welcome onto the glass, working from the middle of the word outward. Use the gridline underneath to keep it level. Use the spider stencil in place of the O.
2. Arrange the Halloween stencils as desired along the top of the letters. Place the bats stencil in the upper right hand corner of the glass.
3. Follow the etching cream directions to etch the design onto the glass.
4. Turn the glass over so the design is face down. Clean the 4 corners of the glass and the flat side of the pebbles. Place a dab of glue on the flat side of a pebble and gently press into the corner. Repeat for all 4 corners.